The Fordson Tractor Pages Forum

Thanks again guys. Really is nice having these independent remotes and to have the ability to use more "modern" equipment. I am using it to run my Hesston 1071 Mower/Conditioner, an 8ft brush hog with hydraulic raise/lower, and my newest acquisition a New Holland 1010 Stackliner with hydraulic push ...

Hey guys, thanks again for all the help with my Super Dexta project. I am happy to report that I have logged about 60hrs since the rebuild and all is well. I had a few original parts left over that I replaced with "upgrades" and have made those available on eBay. Here are the listings: Clutch assemb...

Happy to report that I have logged almost 50 hrs since rebuild and no leaks. Most of that was cutting and baling 50acres of field. Definitely worked the old girl hard and she took it like a champ. Can't tell you how nice it is to have brakes again! Thanks again to all of those who helped me with the...

Wooaahahaahh....I love it. Goodonya!

Hay guys! Pun intended... sorry it has been so long since my last update/installment but I am happy to report that I have been busy getting my hay down. I had a chance this morning to show how I managed to finish this task. Here you go... To remove the bearing using my 20 ton press I got 6 3' pieces...

had pto leak problems on one of my fergies there was a grove on the collar on the shaft , new seal still leaked , Patrick ( a good man ) at fergieland new all about it and sold me new wear collar . prob solved . I knew the grove was there but chose to ignore it and had to do the job twice . :buddie...

I did run across the use of these "Speedi Sleeves" during my searches. I don't believe mine are worn enough to warrant it as it barely registers on my caliper. However, it does sound like many have used them with great success. I don't believe any machining is necessary as they offer different sizes...

Correction, I have never posted on You Tube, so it must be someone else using the same name! Gerald Wow, must be a fellow "forger of all instruments of bronze and iron." Thanks for the help anyway! Thought it was odd that you didn't have an english accent... :mrgreen: Here is a link to the vid. htt...

Wow Tubal Cain! Nice little setup. Wish you were around here so I could borrow your fabrication. Not exactly stuff I have in my garage. Worked at it a bit yesterday but running into an issue with hub clearance. Should be able to do something similar with the lengths of All Thread and my press. Thank...

Ok, so after a bit more searching I found this link: http://www.fordsontractorpages.nl/manuals/dexta_rear_axle.htm This is a different manual than the one I have and as you can see it says to use a puller or press to remove the axle from the bearing retainer. I am off to put some pressure on it with...

Thanks again BensDexta! I think I got the pics figured now. Thanks for the reply Gerald. Your fabrication sounds interesing...So did you draw the bearing over the threads (see pic)? That is really my main concern here. The manuals description almost makes me think it is threaded on. I pic would be w...

Thanks ol'blue! Yeah lots of pics but unfortunately still not finished yet. Realized I need new brake linings, rear axle bearings, and oil seals. You can see more if you follow our blog. Find the link through our website: www.oursweetwaterfarm.com
Enjoy!

Still trying to figure out this picture posting thing but I think you can see them all when you click any of the links.

As I have not been able to find a post with all the info and pics in one spot pertaining to Super Dexta Rear Axle Bearing and Seal replacement I figured I would start this one. Hope this cuts down on a lot of head scratching and searching for many of you. Well this all started when I noticed oil dis...

...and to set it strait, my Rear Super Dexta Axle Nut measures 2 3/4" or ....70mm for those on the other side of the pond.

So of course after I order the new diverter plate I go out and start the tractor and now the 3 point is working as well as the remote hydraulics. I suspect although I cleaned up the unload valve already that it is still hanging up a little bit. I hope that it will improve as I use it more. Wayne, I ...

Well after sorting out A LOT of other issues first, I finally got around to installing the Remote Hydraulic Kit yesterday. Once completed I hooked it up to my Hesston 1071 Mower/Conditioner which has a two way cylinder for the head. The good news is that the new valve works GREAT! The bad news is th...

Sweet! Thanks again Wayne, that's what I wanted to hear. Like the location you chose to put the valve. I will order up a kit and install it. I'm taking picks of the process so others can see the outcome and possibly take same route if they choose. Cheers!

Thanks for the reply Wayne. Is one of these listings for the plate you are referring to? http://www.ebay.com/itm/hydraulic-adapter-plate-kit-for-ford-tractors-/321139712226?pt=BI_Heavy_Equipment_Parts&hash=item4ac56b20e2 http://www.ebay.com/itm/FORD-HV5902-EXTERNAL-HYDRAULIC-ADAPTOR-PLATE-KIT-TO-ADD...

Thanks Les, I found this which pops up under super dexta. http://www.yesterdaystractors.com/HV4030_Hydraulic-Valve-Kit_10622.htm It seems like a similar one to the one I refer to in the first post. I was under the impression these valves are interchangeable between the Dexta's and Ford 2000's. Hopef...

Wow, over 30 views and not a single response? C'mon guys...this can't be a new idea. Someone has to have some insight on this subject.

Hey guys. Just picked up a 1963 Super Dexta and am new to the forum. Looks like lots of great info here but I can't seem to find exactly what I am looking for in my searches. My Dexta came without a selector valve for the hydraulics. There is only the block off plate so I need to purchase and instal...