The Fordson Tractor Pages Forum

Hi its a Dexta will take a look thanks

Hi i have been fitting a front end loader to my Dexta . After i connected the hydraulics up i tried to pull out the control knob but it was stuck and then managed to break the the knob off which a broken the shaft about an inch in. I believe this is called the Service control valve spool and wondere...

Hi all
I was having the same problem with starting and was advised to have the injectors checked . Took them in to be tested and was told they were knackered £98 later and 3 serviced injectors starts ever time but make sure you use the glow plug

Thanks for your advice very usefull

Is it correct that the earth strap connects to the positive + side of the battery and the lead via solinod to starter motor on the minus - side of the battery on my dexta And if so do i charge the battery in the standard manor
Thanks

Morning had real trouble starting my dexta this morning, have new battery heater plug works but still had to use my van battery as well any ideas maybe use injector cleaner ?
thanks

Hi thanks for all the advice on hydraulic problem just got it all back together and it works great . Now i have a question on the fuel pump which keeps getting air in it which i have to bleed out . Have fitted new filter but still the same problem , it will sit and idle for 10 mins then cut out any ...

Hi has anyone ever used a small baler on a dexta ? I have 4 acres that we make hay on but its had finding someone to bale just when you need it . The fields are on a slope so could weight be a problem ?

Hi Gerry Thanks for reply will give it a try

where can i get hold of 20w/30w oil for my dexta and do i use this grade oil in the hydrulics ? I have some 10w/30w will it do.Thanks

Thanks will give it ago what o rings , gaskets , new parts will i need ?

The arms on the back of my dexta will only lift if i push forward on the top link spring with yolk .This is the same with quadtrol lever in both positions . Also the spring has about about 10mm of play should i tighten it
Thanks