The Fordson Tractor Pages Forum

Hi my name is John i'am new to your forum helo from QLD Australia we have just fited a new turing clutch shoes to the fulltrack P6 it has not been going for over 10 years we have had a bit of trouble with the injector pump rack was stuck now it seems to be over fueling number 4 cyl when you crack the line a bit it runs perfect

looking good tracks apper good about the only thing you cant get. clutchs allways a problen more so on p6 mines petro kero i get clutch fade if i turn to mutch one way, ajustment some times either wont drive or wont let go to turn thow tuch wood ok at moment mine had brocken axcle housing when i got it fairy commen to happen many have a axle brace mine didnt pinched a housing off a tractor intersting to see what was under her skirts to fit it had to strip clutch to intersing to see your pics was about 6 years ago b

Hi Guys what is the valve settings on the p6 one of them is 12 the others are less thanks john


Hi brookwood the tracks look to be in good condition even the rubber behind the frount idler wheel still there

talking of the front idler mine were both hanging back in the fork one to the point of lightly rubbing on the fork I couldn’t get the bearings out took to local engineer who made up a mandrel and got it out and fitted bearings were quite resalable . perkins tappet are .010 th or .254 mm engine warm b

Thanks everyone a pic of one our P6 fordsons

Gday John,
Great job with the crawler, she'd do alright on the sled
Cheers,
Slim

We give our old fulltrack a work out and a few adgustments before putting it back in the shed
Cheers John

Nice to see the old tractor working. Looks like the engine burns nice and clean. Dandy Dave!