Page 1 of 1
Calling JC, super 6 picture wanted!
Posted: Mon Oct 06, 2008 11:43 am
by Sandy Mac
Looking for a favor JC, can you take a photo of how the front upright parts of the super 6 footplates mount onto the tractor please. (both sides), I am finally going to fit mine but think i am missing soething !!
cheers Sandy
Posted: Tue Oct 07, 2008 6:40 am
by JC
Hi Sandy,
Its dark here now, but I'll post some pictures tomorrow.
Posted: Tue Oct 07, 2008 8:37 am
by sandymac
Thanks mate , especially the bar which goes across tractor and bolts onto the front of steering box somehow!!
sandy
Posted: Wed Oct 08, 2008 5:53 am
by JC

This is the front of right one. There's a lot of extra junk bolted to it, that I'll remove soon. I don't think that the bent piece of strap that's bracing it belongs there, but I'm not sure.

The front of the left one. It doesn't look like its been modified

This is the bar that goes across the tractor, taken from the right side.

The bar from the left side. I'll try to get another picture, tomorrow, of where it attaches.
I may need some pictures of yours, too. Does it have a swinging or fixed drawbar?
Posted: Wed Oct 08, 2008 9:36 am
by Sandy Mac
Thanks JC, That helps a lot, but yes if you can get a photo of how/where the crossbar bolts onto steering box? That would be great.
Mine has a fixed drawbar but isnt on the beast just now.
Cheers Sandy
Posted: Thu Oct 09, 2008 6:28 am
by JC
Hi Sandy
Here's a couple pictures of the cross bar mounting. I'm not much of a photographer, and its not an easy place to see into. If you can't tell anything from the pictures, here's how it mounts.
There's a small piece of flat strap that bolts to the same holes (on the steering box) as the back of the front fuel tank mounts. The cross bar is welded to that, at a small angle, so that the cross bar is at the same angle as the front of the foot plates.

In the second picture, you can see the end of the flat strap and one of the mounting bolts behind the tube for the temp. gauge. If you need more pictures or some measurements, let me know.
P.S. Here's a picture of my draw bar. Some parts have been changed, but I think some of it may be original. Does any of it look like yours?
Thanks.
JC
Posted: Thu Oct 09, 2008 10:30 pm
by sandymac
Thats great JC, tells me all i need to know.
My drawbar is kinda similar to yours, heavy and crude!!
cheers sandy
Posted: Sat Oct 11, 2008 10:40 pm
by Mark
What would we do without this site and our friends!!!
Interesting pictures!
Posted: Mon Oct 13, 2008 6:18 am
by JC
Mark
This is the best tractor BB on the internet. Everybody helps each other and no one ever says anything bad about anybody else. Its more like a bunch of guys standing around the shop talking about tractors.
Posted: Mon Oct 13, 2008 6:23 pm
by Mark
JC,
I agree with you one hundred percent. This is really a one of a kind BB.