Fordson Major E1a 1953 PTO Gaurd

This forum is for the Fordson New Major, including the Super Major and the Power Major.
Post Reply
GlowWorm60
Not Quite Blue Yet
Posts: 1
Joined: Thu Aug 15, 2024 6:22 pm

Fordson Major E1a 1953 PTO Gaurd

Post by GlowWorm60 »

Hi Folks, does anyone know the correct bolt size that holds the PTO Guard and cap in place (3 bolts), any thoughts appreciated
Top
Billy26F5
True Blue
Posts: 2322
Joined: Fri Jun 26, 2020 12:01 am
Location: On Billy

Re: Fordson Major E1a 1953 PTO Gaurd

Post by Billy26F5 »

Those bolts are 7/16" UNC, 3/4" long. A run with a tap in the hole is probably worth doing, then the new bolts will fit properly. Don't forget the spring washers.
Sandy
ImageImageImage
Top
Post Reply

Return to “Fordson New Major”