Help on Super Dexta dating

This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Post Reply
SeanGorry
Not Quite Blue Yet
Posts: 4
Joined: Wed Jul 17, 2013 12:02 pm
Location: Co.Donegal,Ireland

Help on Super Dexta dating

Post by SeanGorry »

Hello,I have recently decided to restore my fathers old Super Dexta.It has has been laying up for 18 years with a cracked block after it was bored out :( (I was only a baby so I'm not to blame).Anyway,I just wanted to confirm if my dating of the old girl is correct.It has no documents(tell a lie its has but there off a 61 Dexta :lol: ) so I got the date of the gearbox casting.My understanding is that it was built sometime in May 1964,although as I've never dated a Fordson before(the Leyland's have a big badge with all info stamped on it 8) ) I'm not sure if I'm right.Any information would be greatly appreciated :beer: ,and i hope the below photos are of some help:
Also i forgot to mention that the serial number is complete gibberish :(

Where I got the date from:
(4E8)
Image

The injection pump:
Image

Just below quadrant:
Image

She had a Super Dexta cowl,but unfortunately it disintegrated in my hands along with what was left of the rad :( :
Image

And lastly the bonnet,its Empire Blue underneath:
Image

Brian Cox
True Blue
Posts: 297
Joined: Sun Aug 07, 2011 7:58 pm
Location: Perth

Re: Help on Super Dexta dating

Post by Brian Cox »

serial no. is stamped on the flange between engine and gearbox on left side :beer:

SeanGorry
Not Quite Blue Yet
Posts: 4
Joined: Wed Jul 17, 2013 12:02 pm
Location: Co.Donegal,Ireland

Re: Help on Super Dexta dating

Post by SeanGorry »

After removing a good 4 coats of paint i finally got it :D
(I thought it was gearbox side of the flange facing the rear :oops: )

09D 917297 which is late in the production so around mid to late 64

Image

Thanks for all your help i really appreciate it :beer: :mrgreen:

Now its time to start the real work!

Bensdexta
True Blue
Posts: 2666
Joined: Mon Sep 15, 2008 12:59 pm
Location: N Wales

Re: Help on Super Dexta dating

Post by Bensdexta »

Check out the engine code and number, see here:
http://www.fordsontractorpages.nl/phpbb ... f=3&t=2958

The number is left front top of block just below the cyl head. Supers start 16...., standards 14...
:wink:
Bensdexta - 1961 working for a living!

sky blue
True Blue
Posts: 302
Joined: Sun May 06, 2012 9:20 am
Location: Ireland

Re: Help on Super Dexta dating

Post by sky blue »

hi ,other casting numbers can be found on both sides back axel,
looking at it from back also under seat on hyd cover there is a casting number
the engine number as bensdexta has said is on a flat machined place
on the block under number one injector behind pump, the whole serial number
will be needed ,there only seems to be a couple of numbers showing in picture
good luck sky blue

Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Re: Help on Super Dexta dating

Post by Brian »

If you look on the Wiki from the link at this forum heading and use the codes "fordsontractorpages" and "dotty" you will find lots of information and pictures on this subject. The article is called "Dating Your Dexta" but all the pictures show the position of codes which are the same on all Dextas.

Your gearbox housing is 1964 May 8th so all the other codes should be around that date unless she is a Dexta ASP.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian

SeanGorry
Not Quite Blue Yet
Posts: 4
Joined: Wed Jul 17, 2013 12:02 pm
Location: Co.Donegal,Ireland

Re: Help on Super Dexta dating

Post by SeanGorry »

So I went looking for the engine number,and my question as to why the engine was bored was answered.It appears that at one time the original Super D block "disappeared" :( and it was replaced with a standard Dexta block which was then bored out,and the original Super Dexta front cover was put on along with the new type simms pump and Super D internals :roll: .The new question is should I continue and get it pro welded or just chuck it out,I hear the old blocks are prone to cracking so will my block crack further?

Good news,everything bar the engine is matches and seems to point at mid to late 64 :D

Again I'd like to thank everybody for there help :beer:

Engine Number:
Image

Casting Code (5J8)1958?:
Image

Bensdexta
True Blue
Posts: 2666
Joined: Mon Sep 15, 2008 12:59 pm
Location: N Wales

Re: Help on Super Dexta dating

Post by Bensdexta »

According to my graph of engine number vs clutch housing cast code, your number 14405.. equates to a standard dexta dated about Sept 1959.

I note that your engine cast code doesn't follow the usual format of month (letter), day of month (digit), last digit of year. That may be one for Lesfen!

So it's def not the orginal engine. What happened to the original block?

Ref cracking, as far as I know, cracking of the block is due to frost damage, ie no antifreeze. So no reason why a crack should get worse if you maintain the antifreeze.
Bensdexta - 1961 working for a living!

Post Reply