Page 1 of 1

hydraulic parts

Posted: Wed Apr 16, 2008 8:00 pm
by jambug123
hi all,
does anybody know where i can get a main control sping plunger, yoke and control spring from as mine is siezed solid.

thanks in advancefor any help
James

Posted: Wed Apr 16, 2008 9:19 pm
by Brian
Try a little heat. The one on Oscar's Dexta was also seized but came free with heat and lots of Plus Gas. I have had to heat them to cherry red sometimes.

Because they are external they nearly all seize and you have to be careful not to damage the fine threads.

Posted: Wed Apr 16, 2008 9:24 pm
by jambug123
thanks Brian, i shall try that as i am going to remove it as i have to replace the position control pin as mine is badly worn.

Regards
James