Super Dexta - Complete Service
Posted: Thu Feb 04, 2010 4:16 am
Just finished a 100% service on my 1962 Super Dexta.
-Pulled top cover and replaced hydraulic filter.
-Drained all hydraulic fluid and replaced.
++once positive hydraulics working, installed a lever operated remote hydraulic kit. Fabricated bracket putting remote lever to top and rear of 3PH lever.
-drained transmission and replaced fluid.
-changed engine oil filter and oil
-drained injector pump and refilled with oil
-replaced fuel filter
-clean and replaced oil in air cleaner.
-complete steering lube.
-Adjusted brakes and emergency brake.
-checked torque on fasters
Tractor has been dependable. This was just my annual service.
Comment: While the lift works normal and is fairly fast and does not drop with implement, the hydralics in remote mode are slow in comparison to my larger tractor. I have a hydraulic self tilting dump trailer, and the Super Dexta takes three times
as long to raise. However it is more nimble with the trailer and for light work like hauling a load of firewood I thought it would be handy to have a remote kit. Also wanted a hydraulic top link for box blade work and to run a disk mower.
Ready for work in 2010.
Wayne

-Pulled top cover and replaced hydraulic filter.

-Drained all hydraulic fluid and replaced.
++once positive hydraulics working, installed a lever operated remote hydraulic kit. Fabricated bracket putting remote lever to top and rear of 3PH lever.
-drained transmission and replaced fluid.

-changed engine oil filter and oil
-drained injector pump and refilled with oil

-replaced fuel filter
-clean and replaced oil in air cleaner.
-complete steering lube.
-Adjusted brakes and emergency brake.
-checked torque on fasters
Tractor has been dependable. This was just my annual service.
Comment: While the lift works normal and is fairly fast and does not drop with implement, the hydralics in remote mode are slow in comparison to my larger tractor. I have a hydraulic self tilting dump trailer, and the Super Dexta takes three times

Ready for work in 2010.

Wayne