The Fordson Tractor Pages Forum

Trying to find the part number (or sizes) for the two o-rings (inlet and exhaust oil passages) that set in the counterbores on the top of the rear transmission flange just under the hydraulic cover and gasket. I cannot find them in the parts diagrams. They both are identified in the Service Manual Section 8 page 23 (no part number mentioned) and shown in Fig 39 on that same page.
1964 Super Dexta
Can someone point me to the right location/page in the parts list?
Appreciate any help with this one.
Mike

I see what you mean Mike

The gasket and body is shown on page 30 with the gasket listed on page 31 but, no mention of the O rings.

I you have the old ones then pop down to a local good hardware store or engineering shop as they will be able to match them up.

Or, alternatively, by an O ring kit (this is what I have done) as they are not pricey and very useful to have to hand

Lost count of the number of times I have reached for the O ring kit. Wouldn't be without one.