Page 1 of 1
Exhaust manifold problem
Posted: Sun Jul 25, 2010 10:52 pm
by landowner
Having a thought and decided to route the exhaust so that it clears the bonnet as per the '35'
Will a '35' manifold fit the 3 cylinder Dexta diesel so as I can do this please.
Exhaust manifold problem
Posted: Tue Jul 27, 2010 9:22 pm
by Bill Cox
I don't know if the 35 manifold will fit but you can get an adaptor pipe and do it. Here is a thread from 09 where I did mine.
http://www.fordsontractorpages.nl/phpbb ... highlight=
Posted: Tue Jul 27, 2010 11:51 pm
by landowner
Thanks for the link.
Just as a matter of interest , what are the blanking plates for on the head next to the exhauset ports?
thanks
Posted: Wed Jul 28, 2010 3:45 am
by woodseaves
Those will be the combustion chambers, if they are ok don't touch, trust me!!!!
Posted: Wed Jul 28, 2010 11:01 am
by landowner
woodseaves wrote:Those will be the combustion chambers, if they are ok don't touch, trust me!!!!
Ta....leave well enough alone then....