Page 1 of 1

AIR BREATHER PLATE

Posted: Wed Aug 18, 2010 9:47 pm
by Brendan Mc Caul
:) Hi everyone!
Looking for some help restoring a super dexta.
The plate that is bolted on the back of the engine for holding the air filter can and throttle linkage there is a s shaped bracket that bolts on behind the air filter to the head the question i have is the air breather pipe from the rocker cover the bracket that holds the pipe is it bolted behind or on top of the s shaped bracket?
If somebody had a picture or the answer that would be great.

Posted: Wed Aug 18, 2010 10:15 pm
by Bensdexta
Have you seen the parts list downloadable from www.fordson-dexta.de ?
Reference to this might answer your Q, or at least enable others to understand your Q more clearly.
All the best :wink:

Posted: Wed Aug 18, 2010 10:41 pm
by Brendan Mc Caul
Yes on the parts book page 56 item 62 s shaped bracket bolts on to side of head with 2 bolts one of the bolts also holds the air breather pipe of the rocker cover my question is it behind the bracket or on top.
Thanks again.

Posted: Wed Aug 18, 2010 11:05 pm
by Bensdexta
Does the photo below help?
Image

It's a standard Dx rather than a Super, but I expect it's the same.
All the best,

Posted: Thu Aug 19, 2010 1:46 pm
by Brendan Mc Caul
:) Thanks
Put the parts book does not show view of right hand side of engine what i need to see.
Will take a picture tonight and upload it to show what i am talking about.

Posted: Thu Aug 19, 2010 6:07 pm
by Brendan Mc Caul
:D Thanks
When i looked at your message the picture did not come up put it is there now and answers my question.
Thanks Again.