Page 1 of 1
					
				Stop Cable
				Posted: Fri Aug 20, 2010 3:24 pm
				by Donegal Dexta
				Where does the stop cable cut the diseal supply to the engine. Does anyone have any photos of where the stop cable cuts the fuel supply in their dexta?? Cheers
Donegal Dexta
			 
			
					
				
				Posted: Fri Aug 20, 2010 4:19 pm
				by Brian
				The stop cable does not stop the fuel supply as such. It moves the control rack in the pump so the pump no longer supplies fuel to the injectors.
			 
			
					
				Stop Cable
				Posted: Fri Aug 20, 2010 11:40 pm
				by Donegal Dexta
				Does anyone have a photo of how the stop cable is connected to the control rack on the pump??
Donegal Dexta
			 
			
					
				
				Posted: Sat Aug 21, 2010 12:23 am
				by terry274
				
[/img]
 
			 
			
					
				
				Posted: Sat Aug 21, 2010 6:01 am
				by pjjms
				I don't have a close up picture of mine but the lever is around behind the pump between the engine block and the pump. I think the picture above is of a later model tractor with a mechanical govenor. Mine has a pneumatic govenor.
If yours is an early tractor put your hand behind the pump you will find the lever and there will also be a bracket for the cable towards the rear. To be honest the cable is in a dog of a place to connect.
			 
			
					
				Stop Cable
				Posted: Sun Aug 22, 2010 10:23 pm
				by Donegal Dexta
				Cheers quys, if anyone has a close up of the stop cable connection at the back of the pump it would be aqppreciated. Thanks.
Donegal Dexta
			 
			
					
				
				Posted: Wed Aug 25, 2010 12:30 pm
				by john.n
				you can see the stop control clearly in one of the photos
http://cgi.ebay.co.uk/FORDSON-DEXTA-FUE ... uipment_RL 
			 
			
					
				Re: Stop Cable
				Posted: Tue Feb 12, 2013 10:52 pm
				by simco
				I have a Fordson Power Major tractor and need to replace stop cable.  Available parts seem to come in 2.2 & 1.5 metres.  I only require 1 metre length.  Is it as simple as just cutting and reducing the lead to length required?
			 
			
					
				Re: Stop Cable
				Posted: Thu Feb 14, 2013 12:28 am
				by john.n
				yes