Page 1 of 1
Injector pump fixings
Posted: Sat Feb 12, 2011 9:46 pm
by marcusgs
Hi, Can someone confirm to me that the dexta injector pump is fitted with studs please? I have 3 but can't find any more!
Thanks,
Re: Injector pump fixings
Posted: Sat Feb 12, 2011 11:09 pm
by john.n
think its 5 studs. there is a good one to find round the back of the pump.
are you trying to remove the pump?
regards,
John
Re: Injector pump fixings
Posted: Sun Feb 13, 2011 10:04 am
by marcusgs
Hi John,
No, I'm trying to re-fit the pump, but seems like I only have three of the five studs
Seems like I need to beg or make two new ones then!
Thanks,
Re: Injector pump fixings
Posted: Sun Feb 13, 2011 11:23 am
by Jerry Coles
Use your exisiting studs to secure the pump on the engine block side (limited depth to keep away from gear wheels) but you could use bolts on the outer two holes but again check the clearance.
The two lower studs on the block side are very awkward to access - you need a long extension and long fingers!
Jerry
Bath
UK