The Fordson Tractor Pages Forum

when i lower the 3 point linkage on my super dexta, nothing happens at first then it goes down all of a sudden.Any answers? true blue Brian Cox

Sticking control or unload valve.

thanks brian, what do I do to rectify?

The top has to come off and the relevant valves cleaned and polished with either Brasso or jewlers polish. Not a bad job if you take your time. There are pictures here:

http://www.fordsontractorpages.nl/wiki/ ... tting.html

You can also check the Position Control pin and replace that if necessary at the same time.

hi brian, can't seem to acess photos.

Are you using "fordsontractorpages" and "dotty" as your codes? The link goes straight there for me.

hi Brian,
using fordson tractor pages but don't know what dotty is. I am being asked for user name and password, which I have tried without success.

Brian Cox wrote:hi Brian,
using fordson tractor pages but don't know what dotty is. I am being asked for user name and password, which I have tried without success.

As Brian says the two words he's given are user & password

thanks Brian, got it at last, I will give it a go.

have to wait a bit,tractor is in a lean to and weather is rubbish.