Generator bearings?
Posted: Wed Jan 23, 2013 10:48 pm
Hello all
cured the problem with the draw of current to the dynamo, was a fault with the VR. Cured that but the dynamo is quite noisy when the tractor is running, and if used at any rpm the dynamo gets quite hot?
I thought maybe this is knackered bearings, if so are they changeable? Or is it a case of replacement dynamo? thanks
cured the problem with the draw of current to the dynamo, was a fault with the VR. Cured that but the dynamo is quite noisy when the tractor is running, and if used at any rpm the dynamo gets quite hot?
I thought maybe this is knackered bearings, if so are they changeable? Or is it a case of replacement dynamo? thanks