Exhaust manifold problem

landowner · Post by **landowner** » Sun Jul 25, 2010 10:52 pm

Having a thought and decided to route the exhaust so that it clears the bonnet as per the '35'
Will a '35' manifold fit the 3 cylinder Dexta diesel so as I can do this please.

Bill Cox · Post by **Bill Cox** » Tue Jul 27, 2010 9:22 pm

I don't know if the 35 manifold will fit but you can get an adaptor pipe and do it. Here is a thread from 09 where I did mine.

http://www.fordsontractorpages.nl/phpbb ... highlight=

landowner · Post by **landowner** » Tue Jul 27, 2010 11:51 pm

Thanks for the link.

Just as a matter of interest , what are the blanking plates for on the head next to the exhauset ports?

thanks

woodseaves · Post by **woodseaves** » Wed Jul 28, 2010 3:45 am

Those will be the combustion chambers, if they are ok don't touch, trust me!!!!

landowner · Post by **landowner** » Wed Jul 28, 2010 11:01 am

woodseaves wrote:Those will be the combustion chambers, if they are ok don't touch, trust me!!!!

Ta....leave well enough alone then....