filter plate on sump

This forum is about the Fordson Dexta, Super Dexta and Petrol Dexta.
Post Reply
sky blue
True Blue
Posts: 302
Joined: Sun May 06, 2012 9:20 am
Location: Ireland

filter plate on sump

Post by sky blue »

does anyone know the date the sump filter plate with the bolts on bottom of sump was done away with on the dexta/sdexta.
or were the filter kept on all dextas until end of productionin sept/64
sky blue

Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Re: fliter plate on sump

Post by Brian »

The parts book says sump and intake filter were changed in October 1963.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian

sky blue
True Blue
Posts: 302
Joined: Sun May 06, 2012 9:20 am
Location: Ireland

Re: fliter plate on sump

Post by sky blue »

Thanking you brian, was the filter compleatly done away with or would it still
be connected to sump in some way :scratchhead: forgive my ingnorance
sky blue

Brian
Grumpy
Grumpy
Posts: 5216
Joined: Wed Apr 16, 2008 2:07 pm
Location: Norfolk, England.

Re: filter plate on sump

Post by Brian »

Its hanging on the intake pipe, you just have to drop the sump to get to it.

Reason for changing is later oils did not "sludge up" the filters because they are better at holding the carbon in suspension.

A few weeks ago we were discussing a Petrol/Kerosene Major that was badly sludged, the filters had to be dropped and cleaned at regular intervals back then but still the sludge stuck on all parts of the engine.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian

Post Reply