FLAIL MOWER FOR A DEXTA
FLAIL MOWER FOR A DEXTA
Could anyone help me with some advice for the purchase of a suitable flail topper, what make, size, hp, and lift capability etc. Regards Rob
I have a second-hand Kuhn 5' behind Dotty. It is more a brush cutter than a finish mower but I use it to take the tops off potatoes as well as cut grass. She is the ideal tractor for me on that.
Dotty is about 37 hp.
Dotty is about 37 hp.
Fordson Tractor Pages, now officially linked to: Fordson Tractor Club of Australia, Ford and Fordson Association and Blue Force.
Brian
Brian
-
Jos Cuypers
- True Blue
- Posts: 127
- Joined: Thu Apr 17, 2008 10:06 am
- Location: Tongeren - Belgium
I have a 2 bladed - total width 180mm - off-setted brush-cutter (easier cutting under small trees 
). It cuts everything to pieces, exepts stones ! The recommended HP is 40...75HP, but I always drive at lower speed (1 for high grass - 2 or 3 (= 1 high) for short grass) and than she can handle it with ease.
If you need a nice flat and smooth grass-landscape, Check at http://www.caroni.it/inglese/mac_agrico ... lcome.html
They are easy to find and not that expensive (at least in belgium).
I always say : she (dexta) has 32 BHP, but a donkey behind the steering wheel.
). It cuts everything to pieces, exepts stones ! The recommended HP is 40...75HP, but I always drive at lower speed (1 for high grass - 2 or 3 (= 1 high) for short grass) and than she can handle it with ease.If you need a nice flat and smooth grass-landscape, Check at http://www.caroni.it/inglese/mac_agrico ... lcome.html
They are easy to find and not that expensive (at least in belgium).
I always say : she (dexta) has 32 BHP, but a donkey behind the steering wheel.
Rgds
Jos
My dexta has 32 Horse power, but a donkey behind the steering wheel.
Jos
My dexta has 32 Horse power, but a donkey behind the steering wheel.